[THEFERMANATOR]

Well, I got her finished out and going to try her out for awhile before I make anymore changes. My thermometer is supposed to be in Monday, but other than that all I didn't do was add the baffle. I decided to hold off on that and I'm going to try adding on an extension to the chimney to bring it down furthur first and see what that does. I'll make it adjusteable so I can move it to allow all of the smoke to go in through the bottom, or part through the bottom and part through the joint. I also added in some toggle clamps to hold the center of the lid down because it was bowing out when hot, added on a hanger for my crescent wrench, and put a piece of tubing in to hold my prop rod for the 2nd shelf.

I did run into a problem with it today though. The 1st time I lit it off it took me over an hour to get it up to 300, and today it took me forever to get it up over 200. As soon as I opened the lid the firebox lit off(I could hear it flame up), and it got HOT in a hurry. So I took my mailbox off the top of the chimney to direct the smoke out, and she went to blazing. So I found an old section of 6" furnace vent pipe with an adjusteable 90 on it, and screwed it to my roof for now to get me by. I got 3 slabs of ribs, and 10 pounds of leg quarters on her now, so I had to come up with a quick fix. She's holding a nice 200-225 now with the vent barely cracked open.