Make an appropriate size core replacement from 5/8" CDX PT PLYWOOD. Glassed up the backside and ground the edges so that it can be tabbed into place later
NV Repower 011.jpg
Held the piece in place and marked where the old holes were, layed up 1.5 oz CSM where the gauges weren't, slapped it in place and held it there overnight with some small ss screws
NV Repower 012.jpg
Beveled the edges of the holes so they could be filled with layer upon layer of CSM
NV Repower 014.jpg
The work area
NV Repower 017.jpg