1708
1708 does not bend very good so I butted the 1708 and used CSM to bend around corners.
Today's accomplishments:
Spent all day glassing in stringers, took more time than I thought but I am happy with the results.
Inserted 3/4" A/C plywood (resin coated) into existing stringers and bulk heads (tops cut off, wood removed and cleaned)
Needed to add some putty filler on top as I left the plywood a little short. This allowed me to cap off the tops and make a nice finish.
Added 6" tab of 1708 to the bottoms of all stringers and bulk heads. Added 10" 1708 over top of the 6". Capped the tops of the stringers with CSM with to layers of 10"
This is all I got to today. I still need to add two layers of 10" CSM over top of the 1708 on the bottom.
I can't believe how strong my stringers are now.
I am almost ready for the floor which will be 3/4" A/C or 3/4" birch from Lowes. About the same price. Not sure if birch is much heaver or not.
I will be going over the 3/4" floor with two layers of CSM on both sides.
This should give the boat a very solid feeling.
I am decided not to add any foam. Leaving everything able to drain and breath.
|