View Single Post
  #12  
Unread 03-13-2014, 10:42 AM
awthacker's Avatar
awthacker awthacker is offline
Senior Member
 
Join Date: Aug 2010
Location: Jacksonville, FL
Posts: 465
Default

Quote:
Originally Posted by phatdaddy View Post
what oil are you burning?
I use the cheap oil... usually pick it up at WalMart. Sometimes the Evinrude stuff, sometimes the generic-looking stuff in the blue gallon container (don't remember the brand).

On Sunday, it ran awesome. Had it running over 40 mph on the way back in with a light east wind and a small swell behind us. That's with 4 grown men plus scuba gear. I have a 6 gallon pony tank with fresh 93 octane, so I may mix some seafoam with it and do the decarb, but everything seems in good working order.

I had replaced the throttle shift arm back in November after a failed fishing trip, but only started the engine and didn't actually run the boat after the part swap. Then started it in December and felt like something was off. Tach was racing up to 4000 rpm at idle, but I think the tach may have gone bad. Eventually I had a neighbor (not an OMC guy) come check it out with me and he thought everything was fine, but it needed new plugs and some heavy running. Seems to have done the trick.
__________________

'82 V20 Cuddy '94 Evinrude 175HP

Aaron's V20 remodel
Reply With Quote