[smokeonthewater]

So my 99.5 f-350 has had quite a bit done to it and I thought you guys might enjoy seeing some of the mods ...

Truck is a crew cab 4x4 longbed dually with a 7.3 powerstroke and a ZF-6 trans... It originally had a 4r100 auto but I swapped when the slush-o-matic died.
The column shifter was re-purposed into a trailer brake lever. I shortened and reshaped it and topped it off with a "not for parking" chrome knob.

I modified my electric brake controller inside to allow the cable from the shifter to actuate the manual lever on the controller.



I have a roll n lock tonneau cover, a 100 gallon aux fuel tank (plumbed to a selector valve and wired to the factory gauge with a main/aux switch on the dash) a curt 20k lb slider 5th wheel hitch and an over the bedrail toolbox dropped down with a home made bracket that bolts to the 5th wheel rails.

I have 5k lb helper air bags and have been adjusting them with a chuck from the back bumper area which leads to my current project.......