1/2" for the smaller hatches, 5/8" for the floor and 3/4" for the large deck plate over the fuel tank, IIRC. Knees have 2 layers of 1.5 oz matt sammiched in between two pieces of 3/4" For the hatches I drilled the Coosa and layed it into 2 layers of wet matt before adding weight.
Encapsulated by placing a couple layers of matt on the back of the hatches, two matt and one layer of 24 oz. roven over the floor, about three layers of roven over the knee braces once again layed into matt.
If I had it to do over I would back off the glass/ use 1708 or something similar. I know I am resin rich.
__________________
1996 -19' NV Flats 115 Mercury 4-stroke
1983 -20' Wellcraft Center Console 250 XS
|