Welcome to the site!
You may not have enough space to do what you want to due to the angle of the hull.
Might I suggest installing an access hatch between the last floor box and the bilge. This will give you a lot of room for most anything you want to do.
Also you can make the drain hole between the inner bottom and bilge bigger.
By putting the pump(s) in this area you will have them against the bottom of the boat which would be even lower than the shell in the bilge area.
__________________
'75 Cuddy with '00 Johnson Ocean Pro 150 horse
Benny
Last edited by tsubaki; 07-23-2013 at 05:30 AM.
|