Quote:
Originally Posted by THEFERMANATOR
Sounds almost like the trailering button to me from the description. The trim and tilt switch in the binnacle is supposed to be limited by the trim limit switch on the outdrive so that you don't accidentally trim the outdrive to high while underway(but the trim limit switch burns out OFTEN, so most are bypassed). So they put a seperate button on the dash to allow you to trim the outdrive the rest of the way up.
|
I think you may be right, I am unable to put the outdrive down. It sounds like it is going down but the drive does not move... I'll give that a try, I bet if I hold the button and press the down... things may happen.