Manny I'm following your thread and you seem to be all over the place bud. First things first Rome was not built in a day. Second thing is I see in one comment that you ordered a bracket and in a nother comment you want to use a jack plate. You don't have enough backset to use a jack plate because you have a solid transom,just remember you have to tilt and trim the motor. You have a perfect setup to do a bracket conversion ideally with a 25" inch motor and have a really nice rig. If you order the bracket and put the 20" motor on it then you gotta do what ya gotta do, just remember you are gonna want to bring it up to a 25 " at some point. I'm building my boat to a 20" inch transom mount setup but I have already set in my mind that it will be converted to a solid transom with a 25" and a bracket within 2 years, I'm just dealing with what I have for the time being. I wish you all the luck on your build we are here to help which ever way you go with it.
|