[tartuffe]

That performance vc is a great product, painted about 4 coats with 30 minutes between coats and sanded down to my desired finish. Used a2000 for a primer because I had exposed fibers from my hull being in such bad shape. I sprayed a nice thick coat, sprayed with black spray paint, sanded with and orbital sander with 120 grit and then block sanded the low spots until all the black paint was gone. Repeated that process 4 times to get a great fair finish. Probably not necessary to do that many coats below the waterline but if you paint above the waterline with a gloss finish completely necessary.