[macojoe]

Mine are 5 years old now and always in the salt, not one issue!! They are Bennets and work great on the Ox. Adjustment on that boat takes a count of 1 and makes a differences!
Install was not that hard, except getting them bled, make sure after install yo ck often to be sure the oil is full! After a few times they will be fine and no worries. I have never added a drop to mine in 5 years! When putting lines together I used Teflon tape on all connections!

Tools to remove will be Philips head screws, wrenches, a few rags to clean up fluid, maybe a pry bar if they are like mine with a ton of 5200. Maybe vice grips in case one or more screws get stuck in there and you strip the head?