You do have to be carefull when useing it ,,Keep the blade moving and on a low angle or you may dig into the gel coat,,,If you just used a stright blade or scraper you will damage the gel also with nicks and gouges ,,With the hot blade decal remover as long as you keep it moveing and on a low angle to the gel coat you should be ok...I just removed 2 very old 4foot long Grady white decals and it only took 10/15 mins. I had to go back with some acetone to remove leftover glue but i was all done in aboue 30mins,, it only cost around $10 at harbor fright ...
|