Quote:
Originally Posted by Kracker Jack
Destroyer, the bedliner you used did you roll it or spray? Did you buy the clear base and then tint it your color? Can you get it in white? Do you need to prime the surface? Thanks Des!
|
I sprayed it on since I did the work in my brothers garage. (No wind to contend with and also it's the recommended way to apply the product) The base comes pre-measured in a bottle, (4 bottles to a kit) you add the hardener into it, screw on the cap and shake for 2 minutes to mix, then remove the cap and screw on the shutz gun to spray it. As I recall, yes it comes in a white version also. No, you only need to prime the surface if it's bare metal. For fibreglass just lightly scuff the area with a sanding disk, clean and degrease and you're good to go.
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer
1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer
1996 V21 w/1993 200HP Mercury on a Shoreline Trailer
All towed by a 5.7L Hemi Durango.
If God didn't have a purpose for us we wouldn't be here, so
Live simply, Love generously, Care deeply, Speak kindly.
(Leave the rest to God) 
Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless.
|