Used 3M Super Duty Rubbing Compund on all the Aluminum, then used Wenol. Cut and drilled all new brackets from 3/16" SS angle and replaced all u-bolts and hardware with SS. Replaced the fenders. Old fenders were in rough shape, cracked at the corners. Tires used to rub as the torsion axle made the trailer a little lower to the ground. Special spacer and wedge was employed to adapt the new fenders and give some additional clearance.
NV Trailer 010.jpg
NV Trailer 022.jpg
NV Trailer 012.jpg
NV Trailer 017.jpg
NV Trailer 018.jpg