Looking at your engine while sitting in your boat, the tilt/trim sender is on your right, (port side) just about level with the top of the swivel. it looks like a small round black button, maybe an inch in dia and 3/4 of an inch thick. 2 small machine screws (either 10 x24 or 12 x 24) hold it in place. It has two wires coming out of it. One wire loops to one of those machine screws and is ground. it's about 4" long. The other wire connects via a push in connector to your wire harness and goes back, thru your harness, to your tilt guage.
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer
1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer
1996 V21 w/1993 200HP Mercury on a Shoreline Trailer
All towed by a 5.7L Hemi Durango.
If God didn't have a purpose for us we wouldn't be here, so
Live simply, Love generously, Care deeply, Speak kindly.
(Leave the rest to God) 
Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless.
|