Quote:
Originally Posted by Blue_Runner
That is what I was thinking. I just don't want to F up the tank, ya know? Also I do not want to have to pop the tank hatch. The hatch appears to be glassed in place from the factory and since it isn't soft or anything I don't want to disturb it if I can help it. I thought it was just bedded in place but I put my hand thru the round inspection hole and felt under there and there is no seam on the underside?
|
As discussed on the other thread, that floor is solid..no seams. They just glued the wood to the underside of the deck. No sealant, nothing. I guess they figured that if you were going to cut the floor to reach the tank then you could just cut the wood at the same time. 
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer
1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer
1996 V21 w/1993 200HP Mercury on a Shoreline Trailer
All towed by a 5.7L Hemi Durango.
If God didn't have a purpose for us we wouldn't be here, so
Live simply, Love generously, Care deeply, Speak kindly.
(Leave the rest to God) 
Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless.
|