Well I clamped her in every spot I could!!!!! I only did one layer of ply because I wanted to do it one layer at a time and did'nt want my my work to get ahead of me. Im going to soak dowl rod with resin and then run the dowls rods through my clamping holes when the laminating is complete. I cut relief cuts in my plywood in 4 spots to allow the ply to conform to the outer skin I then filled the relief cut with thickened resin. I am very happy with the way the first piece turned out. Im going to clean out one of the garage bays at my dads friday so i can pull the boat in there saturday ITS GONNA GET COLD!!!!!
|