View Single Post
  #7  
Unread 06-24-2011, 10:04 PM
CharlestonSC CharlestonSC is offline
Member
 
Join Date: Apr 2009
Location: Greenville and Charleston/SC
Posts: 82
Default

Well I used a big screw driver in the flywheel against the block 120ftlb
started it worked great.
Does anyone know why mercury used 40amp stator? and why they used 2 20amp stators together each one to 2 different voltage regulators?
is it so if ones side dies the motor can still run?
one of my old volt reg had a wires melted pretty bad and there was a big black burn spot on the circuit board under the epoxy, but the boat still ran and charged the battery.
Reply With Quote