[THEFERMANATOR]

It depends on which drive you have. The early ALPHA units are rated to 300HP at the flywheel, and teh later ALPHA's are rated to 300HP at the propshaft IIRC. The pre-ALPHA drives are a bit weaker by design I believe though. As for high RPM's, they don't take well to that fro mwhat I understand. Theres a guy at screamandfly that mods the ALPHA drives to 400HP or say and 6500 RPM's, but this is for light applications, a V-20 is not considered a light application for an ALPHA drive. 5,000-5,500 is fine on them, and if you plan on going over 260Hp at the flywheel I suggest running the exhaust through the transom and install a drive shower along with running synthetic lube in teh drive as heat is teh enemy with the I/O's. And torque is teh killer for an ALPHA as the gears in them just are not meant to take the abuse(Ibelieve teh ALPHA's use the same basic design as the 3.0L MERCURY 2 stroke outboard lower unit).