when I put the new wood in I "glued" it in place with resin that I thickened with West system adhesive filler. I applied it with a notched trowel. Then I put a fresh layer of woven roving over the whole thing. When I put the floor back in I used West 610. But I used a lot. I think 8 tubes. 5200 would probably work fine too. West offers empty calk tubes that you can mix up your own thickened epoxy and put into the tube.
Last edited by captpete13; 03-05-2011 at 05:39 PM.
Reason: forgot something
|