[Blue_Runner]

Phat, don't know if you read the Marinetex instructions, but any surface you apply to should be at least 55 degrees. Also, the stuff takes a couple of days worth of 60+ degree weather to fully cure. So, if its outside and its cold, you need to try to get it inside somewhere.

I've used a ton of this stuff on all 3 of my boats. I don't think the gasoline will cause a problem.

By the way, how big was the hole?

Let us know if this works. I once used some marinetex on my cavitation plate. A 2 inch piece of it was about to come off. Ever since I put the marinetex on there it hasn't budged. That was 3 years ago...