I think the parts off of a 240 series car motor will fit but I do not know if the head has any effect on the compression. If your still running points
you should replace them with a Pertronix electronic module. Good luck.
AQ130A: Used with the 100 and 250 series drive, ran 9.5:1 compression ratio and used Stromberg carbs. Rated at 130 hp.
AQ130B: Same as above but ran 8.4:1 compression ratio. Rated at 115 hp.
AQ130C: Used with the 250 and 270 series drive, ran 9.5:1 compression ratio and used Solex 44PA1 carbs. Rated at 130 hp.
AQ130D: Used with the 280 series drive, ran 9.0:1 compression ratio and used Solex 44PA2 carbs. Rated at 130 hp.
|