Had a chance to do a little more digging today...new controls are in, nice BRP new ones :) Hooked everything up and still couldn't get a the choke to work. Tore it all down, found it it was getting 12V when I pushed the key in, but nothing was pumping. So it came off and I took it apart, completely gummed up with crap. Thing kinda feel apart in my hands, so I just ordered a new one, bit the bullet and went all new (couldn't find any direct replacements on ebay anyway).
Another Q for you guys, with the new controls hooked up I am still not getting the "beep" when I turn the key on. Think it has to do with not having the system check system attached yet, thoughts? I traced the two wires to the horn and one of them runs to the 8 pin duesch (?) connector that will go into the system check/Tach, so I am guessing that is the brains behind the whole operation. Am I completely off base?
Thanks again, will keep you posted with the results as parts come in.
-Svence
__________________
1984 V-20 Steplift
1998 Johnson 175
|