more coats will never fix that issue now as it can't soak in threw the current epoxy. you could try drilling several small holes in just the glass in those areas and the pump epoxy in and let it bond the areas together. drill size i wouldn't drill any larger than a 1/4 hole. drill an inspection hole anyway to see if it is a vold or just a flush issue that made the epoxy to drt milky from moisture in the air or air temps. it may be find as it is if it was just a temp / moisture issue making it milky.
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's
|