first of all, if any of the magnets are cracked, throw it in the trash, if they are all still in one piece, then you can glue them back in with epoxy, Make spacers out fo wood to evenly space teh magnets. last time I did it was with some JB metal poxy I bought at Lowes, It worked just fine. But before you go any futher, check the stator with an OHM meter. make sure its good, you can go to Rapair electronics.com to get the specs, I would alos recomend one of rapiars regulators as they do a better job than Merc's. If the stator is bad, then repace the system with an external altenator kits, if you just need a balanceer, give me the serial number off the engine, I'll see if I have one
|