Look at the model# on the motor L=20" XL=25" XXL=30"
I understand what you want to accomplish and the jack plate will work fine. Re routing the cable may be easy as pie as MJ said but I would definitely verify that it will work before committing any $$$ to a jack plate. You may need to drill a hole in the transom and route the steering over to the motor with 6" of setback. Don't forget all the wires, hoses steering cable, throttle and shift must be at least 6" longer for the setback plus there must be enough slack for everyone to go up another 5 or 6" as the motor gets jacked up and tilted up.
|