The cloth i used is called 1208. It is 12oz cloth woven at 0/90 degrees. and has .75oz of mat on one side. The purpose of the mat is to help pull the resin into the thick strands of cloth. I layed one layer of ply onto the transom and then put a layer of glass on. then the next layer of ply and then two layers of glass. all of the seams or edges i put a strip all the way around. Make sure you you stagger your seams of cloth. Google transom repair till it makes you sick. There is nothing worse then realizing you did something wrong when you are just about done. Make sure you get everything completely spotless before you start glassing. Good luck
|