Re: I have started motor swap
lol stainless tube is just as bad to remove thats what was stuck in mine on the 21 i had to cut and beat out. don't use that old crappy one then you will have to take 2 mid sections apart. just buy a new one from Franco's buddy for $58 new. you have to remove the side of the tilt section that bolts to the boat to remove the t/t motor. you can't remove the rear corner bolt any other way plus if order follows suit at least one will break off and you will have to drill it out any tap is back to 1/4-20.
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's
|