There are a number of plates that might do what you want. The bottom line is, all you want to do is gain about 5" height on the transom instead of rebuilding it and raising it. The least amount of setback possible would be best but I'm expecting you will have about a 5" setback.
Specifically,what type are you looking at?
Keep in mind, on the plate where it attaches to the boat, there will be about 2" of adjustment and on the motor side, about another 3" of adjustment. Meaning bolt hole patterns.
Oh and what motor is going on the boat?
__________________
'75 Cuddy with '00 Johnson Ocean Pro 150 horse
Benny
Last edited by tsubaki; 08-12-2009 at 02:54 PM.
|