[THEFERMANATOR]

Time for my next update, I'll try and get a few pics tommorrow for my my next update. The fuel tank is back in and my 1/2" feed and 3/8" return are plumbed and my fuel cooler is hung right behind the frame support crossmember. Got my KENNEDY pump in and wired and primed it to the CP3 and found no leaks in the system. The rear end is finished up and new wheel cylinders installed. My TCM is supposed to be in MONDAY according to UPS tracking(the TCM was overnighted on FRIDAY, but UPS decided mine was important enough I guess), and hopefully my driveshaft is done as well. The majority of the wiring is done except for hooking up my relays in the PDC and wiring in my toggles and cruise switch inside the truck. I'm running into TAMPA tommorrow and hopefully my driveshaft is ready and I'll pick up some more hose and cushion clamps to finish up my plumbing.

I took it easy today after putting in several 14 hour days and nights trying to start her up this weekend. Hopefully tommorrow I can fire it off so I can verify my wiring and new injectors, but I'm not going to rush it.