9 amp charging so not a magnet issue. you could pull the carbs and look at the reeds or heck pull the reed body and look in the cylinders and turn by hand till each rod is at the hole then rock to see if you have a bad rod bearing or loose rod cap. those rod caps use either a 5/16 or 8 mm 12 point socket. must be a 12 point. you can check the torque of the rod cap bolts threw the reed holes as well. that 12 point 8mm is avail. at sears.
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's
|