ct is correct.
The motor is a reversible polarity type, the relays of the tilt and trim do the reversing for you.
I can't remember which one was which but lets say blue is up.
Connect the blue wire to the positive battery terminal and the green wire to the negative one, the motor tilts up. Reversing these wires makes it go down.
Not really sure we are right?? Get an ohm meter and see if you get a reading to either of the wires from the housing.
And don't try to jump out ahead of the relays or at the switches, the smaller control wires might not handle the load.
__________________
'75 Cuddy with '00 Johnson Ocean Pro 150 horse
Benny
Last edited by tsubaki; 04-15-2009 at 02:34 PM.
|