Thanks for the info....of course that order makes it more work as my primer bulb was mounted inside the aft hatch so it now needs to be relocated outside into the splash well...
I am trying not to buy 3 times as many parts that I need for this as I usually do before I get it right....This is what I have and need to do. If anybody cant point me to a source for the parts I need it would be appreciated.
Existing set up.....hose from fuel tank appears to be 5/16" ID x 11/16" od. this went straight into the yamaha primer bulb. out of the bulb the hose changes to 1/4" id (a hair bigger actually) x 7/16" od. from there it went right into the fitting that attached to the engine.
Now I basically need to go from the hose from the tank (5/16" ID) to the Racor fuel separator which has 1/4-18 NPTF threaded connection, out of the racor (another 1/4-18 NPTF) connection to the primer bulb and then to the engine .
I know this is way too much to read but if anyone has recently installed new fuel lines I figured they might have it all sourced out.
__________________
1986 V-20
1986 Yamaha 150 HP
|