View Single Post
  #3  
Unread 08-27-2008, 06:40 PM
Dodgerrr's Avatar
Dodgerrr Dodgerrr is offline
Junior Member
 
Join Date: Jul 2006
Location: Niagara Falls
Posts: 17
Default

Quote:
Originally Posted by spareparts View Post
sounds like you need a 19 pitch prop, try to get the rpm to 4400 -4600. Watch that clunking, it coiuld get expensive. the inline 6 set ups didn't come with power steering, but they used a long trim tab to offset the steering torque. be carefull with some props as some of them will hit the extra long trim tab. BTW, the trim tab needs to be adjusted to offset the steering torque
That my friend makes a lot of sound advice. The boat does have some big a** trim tabs.
I guess you use them when travelling in a straight line, right? Turning with the tabs lower in the water wouldmake it more difficult, correct?

I replaced the engine myself last year and a friend said that I should have it sent in for exact alignment.

One other thing... there is a tab above the prop which has very much disintigrated. How important is this part?

BTW, thanks for your quick advice.
Reply With Quote