Thanks for the compliments guys.
Lumber, The prep was simple. I had a couple of small gellcoat cracks to repair so I grinded them out faired and sanded. I roughed up the deck with a 50 grit disc on an orbital sander and primed. They have a special primer to use with there paint, it goes on real milky and dries clear. After that you just roll or spray the non-skid paint on. They sell a special roller for rolling the texture. Its easy and the results are professional looking. i used 1 gallon of paint a quart of primer and 2 rollers, it came to like $125 shipped.