bigshrimp, im going to try this in that link you sent me
Quote:
|
No fire on the 1,3,5 or 2,4,6: Swap red and red/white wires, also blue with blue/white wires. If the problem moves to the other set of cylinders, the stator is at fault. Disconnect rectifier and retest. If the engine fires normally, replace the rectifier. If no change, we recommend replacement of the stator. If you replace the stator and the problem remains try another flywheel, if possible.
|
I'm a bit confused. does this mean i leave the whites and black/yellow stripe alone on both switchboxes. and switch the reds and blues between the 2 switchboxes?
If thats what there telling me to do it seems easy enough. i just want to make sure 1st. thanks again.