I just went out and measured a shift rod that I have in the shop. It is off of an 86 140 looper, but is for a 25" shaft. So figuring you have a 20" leg, the shift rod for yours should measure roughly 30 7/8" - 30 15/16" from the very bottom to the very top. Use a yard stick or something fairly accurate for all of these measurements. But if you have the rod threaded in all the way, then you are stuck in neutral, and the rod will stick up to high to hook up with the selector in forward.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR
2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD 
AND THE PINK JEEP!!!! R.I.P.
http://www.wellcraftv20.com/communit...ad.php?t=11664
|