[THEFERMANATOR]

To check them to see if it is the tilt tube bushings hanging them up. Trim the engines all the way up, then push the trim down switch. If the engines don't move right away, hold the trim down button until the outer 2 trim rams go down almost all the way. Release the button and go back and try and pull the engines down by hand. Feel for resistence while doing this. If you pull it down some and stop pulling and it stays there, then chances are your tilt tube or bushings are causing them to hang up. If the engine goes back up then it's YAMAHA engineereing. Just be careful when pulling them down by hand. If they start coming down, GET OUT OF THE WAY. You DON'T want it to come down on you.