[Skools Out]

sorry guys only worked on the boat today for about 3 1/2 hours but here's what got done.

Holes that i had ground i filled with glass and resin

]













Here's the old transom light hole and the 2 side rod holes someone cut out in bad locations, i filled with plugs of wood i made fit tightly in the holes







Here are those holes above after i glassed over them and filled with resin in the voids







This is a cracking issue that i had in a corner but it was actually only in the gel coat but i glassed and filled anyway





notice the top of the transom i epoxy coated with filler to make smooth before i glass over the transom with a layer of glass.