thats it on pics for now. I can tell you the holder is made locally here in portland by motion marine products. the anchor is a 30# and has the chain welded at the bottom and then the chain is zip tied at the top of anchor. Its called a breakaway columbia river anchor. IF it gets hung up to bad when u are pulling it the zip ties pull loose and at that point the pull is at the bottom of the anchor instead of the top. you always get your anchor back with this system. There is also a 2' buoy ball on a locking slider on the mainline. u throw your ball out when u are ready to pull. it slides down the rope as u pull with the boat. when the anchor releases it eventually gets pulled all the way up to the ball. the lock on the slider holds the anchor suspended at the ball untill you get all your rope in and retrieve it. This makes life much easier as we use 300ft of rope to anchor on deep hoes on the columbia river. check out this site for products!
http://www.promotionfishingproducts....wse.asp?Cat=AN