Re: water pump/lower unit
Nope done erased the photo's.
Remember the splined looking thing toward the front of the foot that is about 5/16 across? It was in the middle but to the front. This is the shift lever mechanism. If you rotated it or moved the control shifter and then assembled the foot to the motor it will be out of time as so far as when you put it in forward,neutral or reverse. Depending on what manufacturer of motor you are working on you may need to remove and install the foot in full reverse or neutral or full forward or one I had you were required to do a combination.
If it goes in and out of gear you did it right.
__________________
'75 Cuddy with '00 Johnson Ocean Pro 150 horse
Benny
|