Wellcraft V20 Community - will prop fit?

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)

- Modifications (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=13)

- - will prop fit? (https://forums.wmpdevserver1.com/community/showthread.php?t=9751)

bsteckel

06-11-2008 04:21 PM

will prop fit?

as i stated in the past, i am in the dark about outboards ... my sea drive came with a stainless prop ..

what are the chances that this prop will fit the motor i buy to replace the sea drive? looking at either yamaha or merc.

are they a standard size, or is each manufacturer different?

THEFERMANATOR

06-11-2008 07:29 PM

What sea-drive did you have before? Some can be made to interchange with a hub change, and some props use an interchangeable hub system which is the easiest to swap over.

bsteckel

06-12-2008 04:10 PM

the sea drive is a 1.6 l VRO

THEFERMANATOR

06-12-2008 04:13 PM

The 1.6L sea-drive uses a 4" hub and a 13 spline prop shaft. They will fit some other V4's with a hub change, but they are meant for the 85-140 JOHNNY-RUDES(and some smaller 3 cylinders with oversized gear cases).

All times are GMT -5. The time now is 01:37 PM.