Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   Modifications (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=13)
-   -   Thru Hull transducer (https://forums.wmpdevserver1.com/community/showthread.php?t=9354)

macojoe 04-24-2008 01:07 PM

Thru Hull transducer
 
Well CB came over today and we got the new transducer in, and I think it is safe to say we will never do another one!!!!!!!!!!!:cen:

No pictures as we were covered, and I mean covered in black 5200!! Hair, ears, eyes, arms, legs what a :cen: nightmare!!

All the money you pay for that stuff and they no can even give you a cheap wrench to do it with!

Well its in and I hope it doesn't leak! Used 1/2 a gal of xylene to get us cleaned up!

:oh:

chumbucket 04-24-2008 01:18 PM

Unless you have very good access, and I mean very good as in easy to reach with both arms, this is one job that I would gladly pay someone to do. You would think that Arimar would make the outside flange of this unit with a couple of recessed holes in order to place a spanner wrench on from underneath. Instead, I had to get both arms into a deck inspection plate with two wrenches. One to keep the transducer from rotating, and the other to tighten the large bronze nut. Couldn't do it. Mj was able to grab enough of the flange from the outside with large waterpump pliers while I tightened the nut inside.
MJ is right. It looks like someone set of a black 5200 pipe bomb in there. :oh:

I'm tired already, now I have to get ready for a 12 hour shift at work tonight.:sad: :cen:

C YENSEN 04-24-2008 01:57 PM

glad you got her done. you will have to post pics of the finished product.:clap:

macojoe 04-24-2008 04:05 PM

I am not going over there for a few days!!! I am not getting near anything till that 5200 is dry! Its all over the place!!

By the way did you get the bilge pump back in??

BuilderFL 04-24-2008 05:43 PM

I know what you mean...I installed my furuno 525 T-BSC and it was no easy task but what a difference in sounding from my old plastic transom mount unit. It's all worth it.:clap:

chumbucket 04-24-2008 06:56 PM

Bilge pump is back in and hoses re-connected.:beer:

macojoe 04-24-2008 07:21 PM

My Hero! :love:

jasoncooperpcola 04-24-2008 10:12 PM

How much does one of those thru hull transducers cost? What model is yours?

macojoe 04-24-2008 10:50 PM

I have a Furuno 620 color fish finder, with a Airamar with a tilted thru hull, total cost for all $900+ Transducer was well over $200.

bradford 04-25-2008 01:56 PM

Good idea getting those lotto winnings in one lump sum instead of spread out over 20 years MJ!

:sun::sun::sun::sun::sun::sun::sun::sun::sun:


All times are GMT -5. The time now is 07:39 PM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.