Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   Repairs (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=16)
-   -   Canvas Frame poles (https://forums.wmpdevserver1.com/community/showthread.php?t=8575)

dfulginiti 01-25-2008 10:50 AM

Canvas Frame poles
 
1 Attachment(s)
Anyone know where I can find a good deal on the frame poles and the plastic blocks they slide into? I have it rigged with a peice of EMT conduit but its far from ideal. Its a 81 V20 Steplift.
Thanks Much!


-----Snapper Blues 10/2007 Off of Ocean City, NJ

Mulv80 01-25-2008 02:35 PM

I saw your post over on the Barn and sent you a message to check this place out, Welcome:beer:

dfulginiti 01-25-2008 03:12 PM

Thanks!
 
Did you meen the photo thing or a place that does tops and canvas. Sorry I'm a little new at this.

macojoe 01-25-2008 04:24 PM

Welcome to the site!!

I fir one have no idea what you are talking about??:oh:

dfulginiti 01-25-2008 04:34 PM

Better Description
 
The canvas top's main support pole is bolted to plastic peices on either side that slide on a track along the port and startboard sides. It alows the canvas to be dropped and wrapped for transoprt. The pole broke abouth 6 inches above where it bolts into the slider peice. If this doesn't help I'll have to take some pictures. Thanks for the response! Dom--

Skools Out 01-25-2008 10:25 PM

i can get you a whole new frame kit complete for $60 plus shipping

dfulginiti 01-26-2008 12:03 AM

Kit
 
What all does it include?
Thanks Much!

msbhammer 01-26-2008 08:29 AM

My 86 v20 has a full enclosure that I will sell ya. $3800 takes it, but of course the boat is encluded.

dfulginiti 01-26-2008 09:53 AM

Thanks but no thanks.
 
Thanks but no thanks! Thats a lot off bagage, and my canvas is only a few years old.

macojoe 01-26-2008 10:44 AM

I know what you are talking about now!! I am a bit slow sometimes :oh:

Slide Locks http://www.boatersworld.com/product/329511117.htm

Sliders http://www.boatersworld.com/product/167100056.htm

Bimini Top Slide Track Assemblies provide an easy way to slide your bimini to and from a storage position. Each Slide Track Assembly Kit includes two lengths of slide track, four end caps, two track stops, stainless steel mounting screws, and two slider mounts for deck/gunnel mounting or two slider mounts for side mounting

also: http://www.boatersworld.com/product/329512578msk.htm


All times are GMT -5. The time now is 10:38 AM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.