I'm into it now!
 

I started ginding out the stress cracks in the deck today. I'm using my rorozip and a 1/4 inch rounded fiberglass bit. It works great, but does anyone know if I need to feather them out or not. I'm going to use West System with microlite additive. My plan is once I fill the cracks is to skim coat the hole deck, sand smooth and texture the deck. Here's a few pics

http://img.photobucket.com/albums/v7...resscracks.jpg

http://img.photobucket.com/albums/v7...resscracks.jpg

I'm not sure where to start here though (inside the molded deck boxes). Do you think I should be able to skim over those cracks with epoxy or do you think the cracks have to be ground out? I also was wondering if you could permanantly glue a hatch liner inside the boxes.


http://img.photobucket.com/albums/v7...kboxcracks.jpg

Re: I'm into it now!
 

a good source of info is the west system site


http://www.westsystem.com/

you should be able to find all the info you need

Re: I'm into it now!
 

Ground down most of the cracked up gel coat in the fwd of the two deck boxes, what a pain iin the A$$ that was, stuff blowing back up in your face. I'm going to try and document the progress in the gallery, pg.4.

Re: I'm into it now!
 

Were a MASK!!!!!!!!!v :o

Going to look good when you are done!! I was going to do mine and said the hell with it!!
I would have to buy a new boat when I was finished !!

Re: I'm into it now!
 

Don't breath that fiberglass dust...get a mask from drug store... ;)...

gonna look great when finished... ;D...

Re: I'm into it now!
 

Ditto on what he said and DONT do it naked either!!! :o

Dont ask how I know. ::)

Re: I'm into it now!
 

Don't worry guys, Iv'e got all my battle gear on; cartridge paint resporator, safety glasses and a long sleeve tee shirt(not my new v-20 shirt). Iv'e the aft deck box to do yet and the rest will be O.K.. The deck itself is not too bad to do. I'll keep ya'll informed.

Thanks for the concern,
Scott

Re: I'm into it now!
 

Try hooking a shop vac to a palm sander with duct tape keeps the dust down good. You can suck some water into it afterwards and make it into paste. I like marine tex for filler its easy to work and sands good once dry.

Re: I'm into it now!
 

Update:

I managed to get most of the deck straight and the first coat of epoxy primer on the deck. Today I removed the windsheild and removed more old stuff (unused antena mounts, old crusty snaps, sliding hatch, the thing looks like swiss cheese. I filled some more holes today. The West System is working out good so far. I'm still shooting for Mem. day weekend although I don't believe it will happen. I'll post some more pics in the next day or two if I get a chance.