Stinkys V18 repairs....
 

Well guys I have been working my butt of lately on the 18. I am going to post some pics later this weekend when i finish things up, but I wanted to go ahead and list some on the things Ive done while I can remember them. ::)


-Lots of Misc. wiring repairs

-new steering cable

-I glassed some plywood down in the front storage area over the foam between the stringers. This helped seal out water and gave me a better place to store stuff.

-I painted the front area with urethane


-all new anchor rope and chain

-I went to my buddys last night and we built an anchor roller out of aluminum plate. Its NICE! I am going to put a roller on it and itll be good to go (pics later)-. I am putting in a bow anchor rope storage box with hawse and a lock too...now it will all stay put!!



-I built a recessed tackle box thats in the front of the console. I am also organizing all my tackle into rubbermaid totes so it can stay on the boat at all times. Iit even has a light! 8)

-I installed speakers and a cd player

-I pulled all the old aireator hoses out of the hull and replaced leaky brass cutoff valve for the intake in the bilge ( I was wondering why my bilge pump ran so much... :o)

-I fiberglassed a few busted up areas on *rod boxes


ill take pictures later tonight or this weekend.....I am sure more will come to me as well. ;D

Re: Stinkys V18 repairs....
 

Sounds like a splash coming soon bud ;D ;) ;D

Re: Stinkys V18 repairs....
 

I recaulked the gas hatch and console yesterday. Man that old 5200 is fun to get off!! :o


I WILL have some pics up later today!! I promise on Willy's life and Skools' sanity. ;D


Well, one of em is worth something at least. ::)

Re: Stinkys V18 repairs....
 

Here we go...a few pics

Here is my leader spool holder. I made it out of starboard and a piece of 1/2" pvc. o its not glued on...just slipped in. ;)


http://www.forumpictureprocessor.com...100_0651_2.jpg


http://www.forumpictureprocessor.com...100_0652_1.jpg



I made two of these rod holders for the front. Starboard and pvc. I routed all starboard edges and even the entry to the top of the pvc.

http://www.forumpictureprocessor.com...s/100_0654.jpg


Here is my anchor hawse for the rope to run into the anchor hatch. I havent put the lock on yet...its next.


http://www.forumpictureprocessor.com...100_0653_1.jpg



Here is the roller a buddy and I built. I also put on all new chain, anchor and rope.

http://www.forumpictureprocessor.com...100_0662_2.jpg



Here is my tacklebox inspired by MJ. It was a severe waste of space. It was an open hole that use to be covered by a fabric cover originally, which was of course long gone. It holds four drawers and a bottom starboard drawer with all my heavy weights in it. I even put a push button light in it.



http://www.forumpictureprocessor.com...s/100_0656.jpg

I havent finished putting together my other trays yet so its a little bare. *::)

http://www.forumpictureprocessor.com...s/100_0655.jpg


Here are the new speakers powered by a Pioneer cd player.

http://www.forumpictureprocessor.com...100_0657_3.jpg



I had most of this stuff waiting around for my V20, but since I decided to scrap that project I put it all in the 18 instead. 8)



I even done a few shed improvments. I ran water overhead so I dont have to drag a hose on the sides of the boat for cleanup.

http://www.forumpictureprocessor.com...s/100_0658.jpg


Righook is at the ready at all times too. ;D


http://www.forumpictureprocessor.com...100_0660_1.jpg



I also put in an overhead shelf for my cleaning stuff. Now I dont have to get down at all to clean up the boat. Its at about eyelevel from the deck.

http://www.forumpictureprocessor.com...100_0659_1.jpg

Re: Stinkys V18 repairs....
 

Busy busy busy, when the splash brother

Re: Stinkys V18 repairs....
 

That stuff looks awesome Stink! It sound like you were using your head for alot of that stuff.

Re: Stinkys V18 repairs....
 

Damm, I should get my wife to read Stinks thread, maybe she maight learn something and work around the house as much as Stink been working ;D
Looking good Stink !!
Love those big old volkswagon looking headlights on the front of her.
Just got off work this morning, can see the boat from my computer. Should I work on the boat or be a couch bum today. : ) :P :P :P

Re: Stinkys V18 repairs....
 

Nice work Stinkster! I like the leader dispenser, been thinking of doing the same.

Re: Stinkys V18 repairs....
 

Thanks guys!! I have a couple other repairs...I will post pics later. I am going to get the steering cable on saturday (have to pull motor).

On the headlights....I hated em at first...previous owner put em on there. I thought they looked dumb and reneck. Then I used em to run offshore at night and wow I love em. 8)


I also realized I am just a dumb redneck anyways. ;D

Re: Stinkys V18 repairs....
 

LOOKIN REAL GOOD MAN!! I WANT AN 18 CC!! 8)

When I build my shed, the water hose is DEFINITELY goin overhead. A drain will be in the floor (concrete floor) and of course, a shelf will be built for cleaning supplies - I LOVE YOU MAN!! :-* :-* :-*

Also, I've never seen a leader dispenser before, but that is an awesome idea too! ;)

The tackle storage on the front is off the chain too!! :o

Love it! What's next? ???