Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   Repairs (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=16)
-   -   Got the NEW Power pack today! (https://forums.wmpdevserver1.com/community/showthread.php?t=7877)

macojoe 11-25-2006 07:45 PM

Got the NEW Power pack today!
 
Ok, I got the power pack today and I have installed it!! I am going to get out tomorrow or Monday for the test run.

Keep the fingers and toes crossed for me!! :-/

If still the same I wil run back in to he ramp and replace the other with the one I took off and hope that is it?

If thats not it I will unbolt the motor and drop it in the water were it sits!!

Got it off ebay with shipping for $43 Brand New OMC part ;D

parishht 11-25-2006 08:24 PM

Re: Got the NEW Power pack today!
 
Good luck MJ, hope everything works for you.

Stinky_Hooker 11-25-2006 09:36 PM

Re: Got the NEW Power pack today!
 
Good luck bud...if you need anymore parts I have used these folks several times for Pp, stators, starters, etc.... with great results. They always have awesome prices and quality "used" parts. I say "used" cause everytime I get something I cant tell its not new. :-/


www.boatmotorrecyclers.com

macojoe 11-25-2006 09:57 PM

Re: Got the NEW Power pack today!
 
Thanks guys! and for the site Stink!

I am hoping for the best, But if not how do you check a stator??

fishbonejr 11-25-2006 10:00 PM

Re: Got the NEW Power pack today!
 
if you throw the motor over board how will you get home should i change the settings of my bigboats auto pilot to come get you and then go down to florida ;D ;D with willy and all his girls

fishbonejr 11-25-2006 10:01 PM

Re: Got the NEW Power pack today!
 
but really good luck with it tommarrow hope all goes well.

macojoe 11-25-2006 10:05 PM

Re: Got the NEW Power pack today!
 
If you could figure out the auto pilot then come on up!

fishbonejr 11-25-2006 10:06 PM

Re: Got the NEW Power pack today!
 
my auto pilot is just WOT and see were it goes

spareparts 11-25-2006 11:36 PM

Re: Got the NEW Power pack today!
 
there are specific test to check a stator, but you have to have a peak voltage adaptor to check them, you can go to rapair.com to check on the adaptor and to go thru the test sequince. So other hints to check is to check the sator lead with an ohm meter, check for resistance to ground and to check for an open circut between wires( can't remember which color) . Another thing to do is loook under the flywheel and see if there is any brown goo laying on the top of the motor, its an idication of the stator overheating, it melts the potting out of the stator. What year model and HP are you working with, when i get back to work Mon, I'll see if I have a manual for your engine.

macojoe 11-25-2006 11:49 PM

Re: Got the NEW Power pack today!
 
1988 Evinrude 175 hp, I can't read the model or serial numbers??

I am not sure thats even it I have been told by a few different people to try the power pack first?


All times are GMT -5. The time now is 07:42 AM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.