|
Transom Trim
When I replace my motor I'd like to replace the cap of the transom. *Has any one replace theirs and if so with what? *Thanks Billy Mac
Here's a photo of what I'd like to replace. http://img.photobucket.com/albums/v1...ckey/Trim3.jpg |
Transom Trim
When I replace my motor I'd like to replace the cap of the transom. *Has any one replace theirs and if so with what? *Thanks Billy Mac
Here's a photo of what I'd like to replace. http://img.photobucket.com/albums/v1...ckey/Trim3.jpg |
Re: Transom Trim
I don't have that piece but most are made from angle alum.
But you will not be able to duplcate the curve like that, you will have to piece it or cut it to bend it. Whats wrong with the one you have?? Can't see any damage from the poic you showed? |
Re: Transom Trim
I don't have that piece but most are made from angle alum.
But you will not be able to duplcate the curve like that, you will have to piece it or cut it to bend it. Whats wrong with the one you have?? Can't see any damage from the poic you showed? |
Re: Transom Trim
If I were to remove my trim, I'd get some 4" tape (glass) and some epoxy. Remove the trim, sand the area, a lay up a few layers with the glass tape. That way the the seam is sealed better to water. Before starting I'd tape off the area in a straight line, then paint when finished.
Airslot |
Re: Transom Trim
If I were to remove my trim, I'd get some 4" tape (glass) and some epoxy. Remove the trim, sand the area, a lay up a few layers with the glass tape. That way the the seam is sealed better to water. Before starting I'd tape off the area in a straight line, then paint when finished.
Airslot |
Re: Transom Trim
There are some cracks in the plastic. I just thought that if the motor is removed I replace it. I know if it ain't broke don't fix it. Billy Mac ;D
|
Re: Transom Trim
There are some cracks in the plastic. I just thought that if the motor is removed I replace it. I know if it ain't broke don't fix it. Billy Mac ;D
|
Re: Transom Trim
here's how i fixed that 21 i'm doing it had Aluminum from factory but that gap under those covers is a spot that starts transom rot
Before http://i8.photobucket.com/albums/a46...1/MVC-020S.jpg http://i8.photobucket.com/albums/a46...1/MVC-008S.jpg Had to do some epoxy and micro ballons repairs http://i8.photobucket.com/albums/a46...1/MVC-014S.jpg http://i8.photobucket.com/albums/a46...aco21_002S.jpg http://i8.photobucket.com/albums/a46...aco21_003S.jpg http://i8.photobucket.com/albums/a46...aco21_004S.jpg http://i8.photobucket.com/albums/a46...21/MVC-037.jpg Before Epoxy Primer [img] http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/Monaco21_041S.jpg[/img] http://i8.photobucket.com/albums/a46...aco21_037S.jpg http://i8.photobucket.com/albums/a46...aco21_036S.jpg http://i8.photobucket.com/albums/a46...aco21_039S.jpg http://i8.photobucket.com/albums/a46...aco21_035S.jpg http://i8.photobucket.com/albums/a46...aco21_034S.jpg After sanding the hull for primer and primed the transom. http://i8.photobucket.com/albums/a46.../21Boat037.jpg http://i8.photobucket.com/albums/a46.../21Boat035.jpg http://i8.photobucket.com/albums/a46.../21Boat034.jpg http://i8.photobucket.com/albums/a46.../21Boat042.jpg http://i8.photobucket.com/albums/a46...21Boat-095.jpg After After the paint on the hull and transom http://i8.photobucket.com/albums/a46...21Boat-224.jpg |
| All times are GMT -5. The time now is 10:59 AM. |
Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.