Soft Spot In Flooring
 

When we decide to repaint the floor last week I also decided to remove all srews from flooring re-seal them then after painting drill all new holes. When painting the floor my knee found a small soft spot. This past weekend I routed out the 1 1/2' X 2' section leaving the lower skin on the flooring in tact. They used those 6x6 square peices of wood which I decided to go with a whole peice of wood. I added one coat of semi heavy fiberglass cloth to the bottom of the wood and was going to resin to the sheet of glass still in the flooring of the boat pulling together with screws. Then after drying I'll remove screws and resin back in the sheet of fiberglasss we cut out of the boat and then feather back into flooring. I ground all of the edges so to not have any excess build up of fiberglass. Does anyone have any opinions of how I'm doing the job or a better way of doing so. Hammer I am taking picks and will post when I can figure how to post them. Its a little tougher sense our home comouter is down and I'm posting from work. Thank for any advise.

Re: Soft Spot In Flooring
 

Sounds like a good plan to me. ;)

Re: Soft Spot In Flooring
 

pictures please ??? ;D

Re: Soft Spot In Flooring
 

I pulled out the manual to the camera last night but that was the wrong time as the beers while working on the boat and grilling dinner kicked in. Do you know with photo bucket can I load the picture directly from the camera or do they have to be copied to a disc first?

Re: Soft Spot In Flooring
 

I don't think so but I have an old camera.

Re: Soft Spot In Flooring
 

Not real sure, I always copy them to my hard drive first them upload them ;)

Re: Soft Spot In Flooring
 

Maybe I'll shut my door to my office and give it a try tomorrow. I work for myself but I don't like for employees to see me doing something I ask them not to do on Co. time.

Re: Soft Spot In Flooring
 

Tomorrow >:( >:( >:( >:( :o :P ;D

Re: Soft Spot In Flooring
 

Thats the beauty of it.

Re: Soft Spot In Flooring
 

Cy...Google up JASC Paint Shop Photo Album and see what ya get...Once in, it's easy...from camera to JASC then SAVE...to PhotoBucket then Browse...click the pic ya want then open...back to PB and DOWNLOAD...from PB, click IMG bar, copy then to reply box and RIGHT-click and PASTE...


Believe me...if I can, YOU can ;) ...