Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   Repairs (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=16)
-   -   Question about this hose... (https://forums.wmpdevserver1.com/community/showthread.php?t=7786)

Bygracealone 03-23-2007 02:47 AM

Question about this hose...
 
Hey guys,

While I was working on my wiring last Fall, I noticed this hose that was disconnected on one end. It was near the hose to fill the tank. Please excuse my ignorance, but where should this end of the hose be connected? I'm guessing the other end is somehow connected to the fuel tank. Is this hose simply a breather hose? Anyway, here are the pics...

http://i50.photobucket.com/albums/f3...Picture009.jpg

http://i50.photobucket.com/albums/f3...Picture010.jpg

chumbucket 03-23-2007 02:51 AM

Re: Question about this hose...
 
Steve. That looks like your fuel tank vent line. Probably be a good idea to get a new fitting to reconnect that hose and vent your fumes outside the hull rather than containing the inside.

Bygracealone 03-23-2007 03:14 AM

Re: Question about this hose...
 
Thanks for the quick response CB,

I sort of thought that's what it was, but I didn't know for sure (I'm still fairly green...). Yeah, definitely should vent it properly or else :o I'll take a look tomorrow to see if I can find where it was connected previously. Then, I'll run down and pick up a new fitting.

Say, with that hose just hanging the way it was, do I need to worry about condensation having made it's way down to the tank?


chumbucket 03-23-2007 07:58 AM

Re: Question about this hose...
 
Not any more so than normal I would think. You probably do have condensation in your tank anyways. Don't loose any sleep over it. Just get a decent water separator filter and you should be good to go. ;)

reelapeelin 03-23-2007 09:07 AM

Re: Question about this hose...
 
BGA...is the vent fitting(thru-hull) anywhere close to where the end of the hose?...that IS the size hose typicly for vent-lines...good luck w/it...

2ndchance 03-23-2007 12:04 PM

Re: Question about this hose...
 
BGA, I agree with Chumbucket on the filter/water seperator. The fuel system on most boats is called an open system, hence the vent. Your car has a closed system. The problem with condensation is worse now due to the ethanol fuel we are using because the alcohol absorbs water. A local Yamaha dealer gave a very informative talk about this at my fishing club a few months ago and it is his recomendation that due to the absorbtion rate of the alcohol in the fuel that you keep as little fuel on board as possible.

Bygracealone 03-23-2007 01:01 PM

Re: Question about this hose...
 
Thanks for the info 2ndchance... Thankfully, there's been little to no fuel at all in my tank since I bought it over a year ago... I do have a fuel/water separator, so hopefully it will catch whatever water might be in the fuel...


rb437 03-23-2007 01:45 PM

Re: Question about this hose...
 
Not sure about the set up on the dual console model, but the vent on mine is mounted right next to the fill

Bygracealone 03-23-2007 02:39 PM

Re: Question about this hose...
 
I went out to check for the vent and only found the hole where the vent used to be :-/

I suppose this is a fairly common part that I could pick up at the local boat store?


Stillrunning 03-23-2007 02:45 PM

Re: Question about this hose...
 
Yes you can find them at and marine store for around $10.00.


All times are GMT -5. The time now is 11:36 PM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.